Digiplex LED KeypadsUser’s Manual
Digiplex LED Keypads 112.5 AREA STATUS DISPLAYIn Area Status Display you will be able to see the status of the individualareas in a Partitioned System
12 User’s Manual3.0 ARMINGWhen the system is armed, it will respond to any breach in the zonesaccording to the way each zone is programmed. For exampl
Digiplex LED Keypads 13If enabled by your installer, the One-Touch Buttons (section 3.6) ora keyswitch (section 3.7) can also be used to arm the area.
14 User’s ManualIf enabled by your installer, the One-Touch Buttons (section 3.6) ora keyswitch (section 3.7) can also be used to arm the area. 3.4 IN
Digiplex LED Keypads 15If enabled by your installer, the One-Touch Buttons (section 3.6) ora keyswitch (section 3.7) can also be used to arm the area.
16 User’s ManualIf enabled by your installer, the One-Touch Buttons (section 3.6) ora keyswitch (section 3.7) can also be used to arm the area. 3.6
Digiplex LED Keypads 17Press and hold:For more information concerning these features, please refer to theirrespective sections.3.7 KEYSWITCH ARMINGYou
18 User’s Manual3.8 AUTO-ARMINGYou can program area(s) to arm automatically (if enabled by your installer).3.8.1 Timed Auto-ArmingIf enabled, you can
Digiplex LED Keypads 19To view the time set, instead of entering the [TIME] in Step 4, the firstnumber of the time you set will illuminate. Press the
20 User’s Manual3.9.1 Zone Bypass 3.9.2 Bypass RecallBypass Recall reinstates all the zones that had Zone Bypass activated thelast time the system wa
TABLE OF CONTENTSINTRODUCTION ...61.1 Legend ...
Digiplex LED Keypads 21 How do I activate Bypass Recall?1) Enter your [ACCESS CODE]. The keypad will emit a Confirmation Beep. The [ACCESS] Symbol wil
22 User’s Manual4.0 DISARMINGWhen the system is disarmed, the control panel deactivates the zones sothe alarm will not be triggered if zones are breac
Digiplex LED Keypads 23If enabled by your installer, the One-Touch Buttons (section 3.6) ora keyswitch (section 3.7) can also be used to disarm the ar
24 User’s Manual4.3 ALARM MEMORY DISPLAYYour system will record all the alarms that occurred during the last armedperiod. If an alarm was triggered in
Digiplex LED Keypads 255.0 ACCESS CODESAccess Codes are codes that will allow you and others to access thesystem. These codes can be programmed to per
26 User’s Manualthat you change this code to prevent others from accessing and changingyour options without authorization.How do I change the System M
Digiplex LED Keypads 275.4 USER ACCESS CODESYour system can support up to 63 User Access Codes. All codes are givena User Number between 02 and 64 (Co
28 User’s ManualIf the keypad emits a Rejection Beep, you may have chosen an existingUser Code or the Master Code used to modify or create the code do
Digiplex LED Keypads 29Table 1: User OptionsOptions on the User Access Codes that activate access to features.Press option on/off Option Description o
30 User’s Manual offStay & Instant Arm feature disabled. onStay & Instant Arm feature enabled. Can Stay or Instant Arm the system offForce Ar
DISARMING ...224.1 Entry Delay Timer ...224.
Digiplex LED Keypads 31Table 2: Area AssignmentIn a Partitioned System the system can be divided into four distinctprotected areas. Programming access
32 User’s Manual6.0 TROUBLE DISPLAYWhen your system experiences problems or is tampered with, the [TRBL]Symbol will illuminate. Most of the trouble co
Digiplex LED Keypads 33If your keypad is in Confidential Mode (see section 2.3.2), the[TRBL] Symbol will not illuminate until you enter your User Acce
34 User’s Manual6.0.2 Group [2]: CommunicatorTrouble [1]: TLM (Telephone Line Monitor)The control panel is unable to access the telephone line.Trouble
Digiplex LED Keypads 35Trouble [4]: Fail to CommunicateA module has failed to communicate with the Security Company.Trouble [5]: Printer TroubleThe co
36 User’s ManualTrouble [8]: Bus Communication ErrorThe Bus is having difficulty communicating between the devices and thecontrol panel.6.0.5 Group [5
Digiplex LED Keypads 376.0.8 Group [8]: Clock Loss The time and date have been reset to the default. This is the onlyTrouble that we recommend that yo
38 User’s Manual7.0 ADDITIONAL FEATURES7.1 PANIC ALARMSYour system can be programmed to send an alarm to your SecurityCompany to alert them that you r
Digiplex LED Keypads 397.2 PROGRAMMING CHIME ZONESYou can program the keypads to emit a rapid, intermittent beep wheneverdesignated zones are opened o
40 User’s Manual7.2.2 Setting a Chime Zone time periodHow do I program all the keypad’s Chimed zones to beep onlywhen they open between specific hours
9.1 Burglar Alarm Testing ...469.2 Fire Alarm Testing ...469.3
Digiplex LED Keypads 417.3 QUICK FUNCTION BUTTONSYou will only need to use the Quick Function Buttons upon your installer orSecurity Company's re
42 User’s Manual8.0 FIRE AND BURGLAR ALARMS8.1 STANDARD FIRE ZONEDuring a fire alarm, the bell/siren will emit an intermittent sound (BEEP-BEEP-BEEP)
Digiplex LED Keypads 43Figure 8-1: Delayed Fire Zone
44 User’s ManualThe Fire Zone may reset itself once the smoke has cleared. Ifit does not, simultaneously press and hold the and buttons for two seco
Digiplex LED Keypads 458.4 MINIMIZING HOME FIRE HAZARDSHow can you avoid the three most common causes of fires at home?1) Never leave cooking food un
46 User’s Manual9.0 TESTING AND MAINTENANCE9.1 BURGLAR ALARM TESTINGTwo people are needed to complete this test. One person will watch thekeypad while
Digiplex LED Keypads 479.4 SYSTEM TESTSpeak to your installer before conducting a system test since the systemmust be programmed to respond to the tes
48 User’s Manual10.0 SYSTEM CHECKLISTImportant: Keep this information in a secure location. 10.1 ZONE DESCRIPTIONIs this a Partitioned System?
Digiplex LED Keypads 4909:___________NNNN N N N N____10:___________NNNN N N N N____11:___________NNNN N N N N____12:___________NNNN N N N N____13:____
50 User’s Manual29:___________NNNN N N N N____30:___________NNNN N N N N____31:___________NNNN N N N N____32:___________NNNN N N N N____33:___________
6 User’s Manual1.0 INTRODUCTIONYour Digiplex™ Security System is an advanced technology securitysystem that will provide you with reliable security pr
Digiplex LED Keypads 51Exit Delay:Area 1 is ___________ seconds.Area 2 is ___________ seconds.Area 3 is ___________ seconds.Area 4 is ___________ seco
52 User’s Manual11:____________ ____NNNNNNNN12:____________ ____NNNNNNNN13:____________ ____NNNNNNNN14:____________ ____NNNNNNNN15:____________ ____NN
Digiplex LED Keypads 5331:____________ ____NNNNNNNN32:____________ ____NNNNNNNN33:____________ ____NNNNNNNN34:____________ ____NNNNNNNN35:____________
54 User’s Manual51:____________ ____NNNNNNNN52:____________ ____NNNNNNNN53:____________ ____NNNNNNNN54:____________ ____NNNNNNNN55:____________ ____NN
Digiplex LED Keypads 5510.3 SPECIAL BUTTONS AND FEATURESOne-Touch Buttons:Place a >if the One-Touch Button is activated. Panic Alarms:Place a >
56 User’s ManualPGMs:10.4 OTHER INFORMATIONInstalled By:__________________________ Date:_________________Service provided by:___________________ T
WarrantyThe Seller warrants its products to be free from defects in materials andworkmanship under normal use for a period of one year. Except as spec
Digiplex LED Keypads 72.0 BASIC OPERATIONYour security system communicates by illuminating the “AC” Light, the “Status”Light, and the various symbols
8 User’s Manual2.1 AUDITORY FEEDBACK (BEEP TONES)When you enter information on the keypad, the keypad will guide you withbeep tones to communicate acc
Digiplex LED Keypads 92.3.1 Normal ModeWhen no actions are being performed on the keypad, the keypad will remain inNormal Mode. In Normal mode the LED
10 User’s Manual2.3.4 BacklightThe illumination behind the buttons can be modified to suit your needs. 2.4 PARTITIONED SYSTEMYour installer can desig
Kommentare zu diesen Handbüchern