SEKURE 1686V Bedienungsanleitung PDF herunterladen (Seite 17)

Paradox Security Systems 15

PMC5: Hand-Held Plug-in USB Memory Key

• Includes USB connector to download or upload system programming to or from a

PC with WinLoad

• Lock switch to prevent accidental loss of data

• LED status indication

• Download or upload control panel/console programming within seconds

• Connect directly to memory connector on the control panel/console

• No need for a telephone line, PC or any other peripheral device

UDS2000: WinLoad Installer Upload/Download Software

• Now supports TCP/IP connections through the IP100

• User-friendly programming and monitoring of the Digiplex EVO, Magellan, Spectra

SP Series and Esprit E55 control panels and modules

• Remote uploading and downloading using most standard modems at 300 baud

• On-site (local) uploading and downloading at 57.6k baud (Magellan console), 38.4k

baud (EVO) or 9.6k baud (E55, MG5000, MG5050 and Spectra SP series) using a

307USB Direct Connect Interface (60m/200ft) or a CONV4USB Converter (300m/

1000ft)

• New in-field firmware upgrading feature that allows WinLoad to upgrade the

firmware of certain control panels/modules via a 307USB interface or a CONV4USB

converter

• Multiple users, groups and databases

• Network-compatible database

• Advanced printing of reports and zone/user programming

• Supports 15 user-selectable languages

MG-RTX3: Wireless Expansion Module (Stand-Alone)

For specifications when used with control panels, refer to page 27 for Spectra SP

Series or page 34 for Digiplex EVO. Stand-Alone operation as follows:

• 32 wireless zones and 8 remote controls (activates on-board PGMs)

• Functions with all Magellan wireless devices (see page 11 to 14) except

MG-2WPGM, MG-REM2, REM3, MG-RPT1 and wireless keypads

• Can be used with a PX8 to activate hardwired outputs

• In-field firmware upgradeable via a 307USB and WinLoad

• 3 PGM output and 1 optional output

• Program with an Esprit 636 or 646 keypad

• Available in 433MHz or 868MHz

PX8: Output Module for Magellan Transceiver

• Connected to the MG-RTX3 in stand-alone mode, the PX8 communicates the

status of up to 8 wireless events, such as zones opening or closing, through its 8

hardwired outputs

• You can also set an output to signal a zone tamper, supervision loss or low battery

• You can also set an output to activate upon pressing specific buttons on an MG-

REM1 or MG-RAC1 remote control

• Connect up to four PX8 on a single MG-RTX3

• Outputs can follow events or have a delay of 1 to 999 seconds or minutes

• Use an MG-RTX3 on-board PGM to supervise the PX8

• In-field firmware upgradeable via a 307USB and WinLoad

• Program with an Esprit 636 or 646 keypad

Stand-Alone Magellan Accessories

Available

Q1 2008

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

SEKURE 1686V Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme SEKURE 1686V