SEKURE DGP2-641 Installationshandbuch PDF herunterladen (Seite 38)

36 R

EFERENCE

& I

NSTALLATION

ANUAL

12.8 S

YSTEM

ATE

& T

IME

The System Date and Time is programmed through the User Menu, please

refer to Clock Loss in section 16.11.

12.9 S

HABBAT

EATURE

(Default = disabled) When option [4] is enabled, detectors and keypads in

the system no longer display system status through the LCD and/or LEDs

between noon (12:00PM) Friday and midnight (12:00AM) Saturday. Normal

operation is re-instated Sunday morning at 12:00:01AM. If required, a user

can access all the usual commands and features during the Shabbat period

by pressing a key or by entering their access code (also depending if and

how Confidential Mode is enabled in the keypad). When no actions have

occurred for two minutes, the Shabbat Feature will re-activate. During the

Shabbat period:

• the LCD keypads only display the date and time

• the backlight is disabled

• the LED indicators on modules with GuardWall technology are disabled

12.10 I

NSTALLER

UNCTION

EYS

Press and hold the [0] key and key in the [

INSTALLER

CODE

] to access the

following function keys.

12.11 M

ODULE

ESET

To reset a module connected to the communication network to its default

values, key in the module's serial number into section [4001].

12.12 L

OCATE

ODULE

To locate a specific module on the communication network, key in the

module's serial number into section [4002]. The green

LOCATE

LED on the

module flashes until the serial number is re-entered into the section or the

module’s tamper or unlocate switch is pressed.

12.13 M

ODULE

ROGRAMMING

All modules with GuardWall technology connected to the communication

network are programmed through the control panel. To program a module,

enter section [4003] to enter Module Programming Mode (see section 4.5),

key in the module's serial number and follow the programming indicated in

the DigiplexNE Modules Programming Guide. To exit this mode, press the

[

CLEAR

] key until Normal Mode is displayed.

12.14 M

ODULE

ROADCAST

To copy the contents of the programming sections from one module with

GuardWall technology to one or more of the same type, key in the serial

number of the source module in section [4004], then enter the serial

numbers of all the destination modules and press [

ACC

For example, to program two zone expansion modules (SN#34540075 and

SN#34412100) with the same settings and options of zone expansion

module SN#34540033:

1) Press and hold the [0] key

2) Key in the Installer Code

3) Enter [4004]

4) Enter 34540033, 34540075, and 34412100

5) Press [ACC]

The control panel automatically copies the contents of 34540033 into the

other two zone expansion modules.

12.15 L

ABEL

ROADCAST

Enter section [4006] to copy the User Labels, Zone Labels (sections [0301]

to [0396]), the Door Labels (sections [2301] to [2332]) and the Partition

Labels (sections [3100], [3200], [3300], [3400], [3500], [3600], [3700] and

[3800]) to all the modules in the system that support these labels.

12.16 R

EMOVE

ODULE

After entering section [4005], the control panel scans all modules on the

communication network. If modules are missing (i.e. module was removed)

during this scan, the control panel erases the module's serial number and

removes the module from the control panel's memory.

12.17 S

ERIAL

UMBER

IEWING

Enter section [4000] to view the serial number of the control panel as well

as the serial numbers of all modules with GuardWall technology on the

communication network. The keypad displays the eight-digit serial number

of the control panel. Use the [

] and [ ] keys to scroll through the serial

number of each module.

12.18 P

OWER

AVE

ODE

(Default = enabled) When option [4] is enabled and the control panel is

running on the backup battery (no AC), the control panel can set all

keypads into a “sleep mode” or Power Save Mode. In Power Save Mode

the keypad's backlight and LEDs are disabled until a key is pressed, an

alarm occurs or an Entry Delay is triggered.

12.19 A

UTO

ROUBLE

HUTDOWN

(Default = 00) If, in a 24-hour period, a trouble occurs more than the

number of times programmed in section [3021], the control panel stops

reporting the trouble. Enter a value (01 to 15, 00 = disabled) into section

[3021]. Each trouble has its own counter. The counter is reset every day at

midnight.

Keys Description

[

STAY

]

TEST REPORT

Sends the Test Report report code programmed in section

[3902] to the Monitoring Station.

[

FORCE

]

CALL WINLOAD:

Dials the PC telephone number programmed in section [3010] to

communicate with a computer using WinLoad.

[

ARM]

ANSWER WINLOAD:

Forces the control panel to answer a call made by the Central

Monitoring Station that is using WinLoad.

[

DISARM

]

CANCEL COMMUNICATION

Cancels all communication with the Monitoring Station or

WinLoad until the next reportable event.

[

MEM

]

INSTALLER TEST MODE

Perform walk tests where the bell or siren squawks once when a

zone opens and twice when it closes. Press [

MEM] again to exit.

Partitions cannot be armed if the Installer Test Mode is enabled.

[

TRBL]

START MODULE SCAN

Verifies the status of modules on the communication network.

The LCD Keypads display the serial number of each module

connected to the communication network.

[

ACC

]

START VOLTMETER READING:

Verifies if the communication network is supplying sufficient

power at the keypad’s location (refer to the Digiplex/DigiplexNE

LCD Keypad and Access Control LCD Keypad Reference &

Installation Manual).

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 65 66

Kommentare zu diesen Handbüchern

Keine Kommentare

SEKURE DGP2-641 Installationshandbuch Seite 38

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme SEKURE DGP2-641