SEKURE DGP2-641 Installationshandbuch PDF herunterladen (Seite 46)

44 R

EFERENCE

& I

NSTALLATION

ANUAL

16.1 R

EGULAR

RMING

This method is used for the everyday arming of the system. All zones within

the partition must be closed to arm the system. The system can also be

Regular Armed by using a One-touch Feature (see section 7.14) or a

Keyswitch (see section 6.4.3). All users are able to Regular Arm the

partition(s) assigned to their User Access Codes. To Regular Arm, users:

1) Enter their [

ACCESS

CODE

]

2) Press the [

ARM

] key. If the code is assigned to several partitions, press

the key corresponding to the desired partition or press [0] to arm all

their assigned partitions.

16.2 S

TAY

RMING

Stay Arming partially arms the partition to permit the user to remain in the

partition. Stay Zones (see section 5.5.3) will not arm when Stay Arming.

Partitions can also be armed by the Stay Arm One-touch Feature (see

section 7.14) or a Keyswitch (see section 6.4.4). Only User Access Codes

with the Stay and Instant Arm option enabled can Stay Arm a partition.

For example, arm the doors and windows without arming the motion

detectors.

To Stay Arm, users:

1) Enter their [

ACCESS

CODE

]

2) Press the [

STAY

] key. If the users have access to more than one

partition, they can press the key corresponding to the desired partition

or press [0] to arm all their assigned partitions.

16.2.1 Stay Arming with Delay

Stay Arming with Delay functions like Stay Arming except armed zones are

programmed with an Entry Delay Timer (see section 5.3.14). If a zone is

triggered, the delay starts allowing the user time to disarm the partition(s).

16.3 I

NSTANT

RMING

Similar to Stay Arming, Instant Arming partially arms the partition to permit

the user to remain in the partition, but all zones become Instant zones.

Partitions can also be armed by the Instant One-touch Feature (see section

7.14) or a Keyswitch (see section 6.4.6). Only User Access Codes with the

Stay and Instant Arm option enabled can Instant Arm a partition. To Instant

Arm, users:

1) Enter their [

ACCESS

CODE

]

2) Press the [5] key. If the users have access to more than one partition,

they can press the key corresponding to the desired partition or press

[0] to arm all their assigned partitions.

16.3.1 Instant Arming with Delay

Instant Arming with Delay functions like Instant Arming except armed zones

are programmed with an Entry Delay Timer (see section 5.3.14). If a zone

is triggered, the delay starts allowing the user time to disarm the partitions.

16.4 F

ORCE

RMING

Force Arming allows the user to arm a partition when Force zones are open

(see section 5.5.4). Once the open zone in an armed partition is closed,

the system will then arm it as well. This feature is commonly used when a

motion detector is protecting an area that is occupied by a keypad. The

system can also be Force Armed by using a One-touch Feature (see

section 7.14) or a Keyswitch (see section 6.4.5). Only User Access Codes

with the Force Arm option enabled can Force Arm a partition.

For example, during Force arming the motion detector remains unarmed

until the user exits the area. The system will then arm the motion detector.

To Force Arm, users:

1) Enter their [

ACCESS

CODE

]

2) Press the [

FORCE

] key. If the users have access to more than one

partition, they can press the key corresponding to the desired partition

or press [0] to arm all their assigned partitions.

16.5 D

ISARMING

All users can disarm, except users with Arm Only (see section 13.5)

enabled on their User Access Codes. Users can only disarm the partitions

assigned to their User Access Codes. The Stay or Instant Armed partitions

can also be Disarmed by using a One-touch Feature. To disarm, users:

1) Enter through a designated entry. The Entry Delay Timer will begin.

2) Enter their [

ACCESS

CODE

]

3) Press the [

DISARM

] key

16.6 B

YPASS

ROGRAMMING

Bypass Programming allows users to program the security system to ignore

specified zones the next time the partition is armed. To bypass a zone, the

zone must have the Bypass option enabled, the User Access Code must

have the Bypass option enabled, and the zone must be within the User

Access Code’s partition assignment. To Bypass, users:

1) Enter their [

ACCESS

CODE

]

2) Press the [

BYP

] key

3) Enter the zone’s 2-digit number or use the [

] and [ ] keys and

press the [

BYP] key when the zone appears on-screen.

4) Press [

ENTER

] key to exit

Users can also activate Bypass Recall. Bypass Recall reinstates all the

zones that were bypassed the last time the partition(s) assigned to the User

Access Code were armed. To activate Bypass Recall, users:

1) Enter their [

ACCESS

CODE

]

2) Press the [

BYP

] key

3) Press the [

MEM] key

4) Press [

ENTER

] key to exit

16.7 C

HIME

ONES

The keypads can emit rapid, intermittent beeps whenever designated

zones within their assigned partitions open or when they open during a time

period. To program a Chime Zone, users:

1) Enter their [

ACCESS CODE]

2) Press the [9] key

3) Press the [1] key

4) Enter the zone’s 2-digit number or use the [

] and [ ] keys to scroll

the list and press the [

ACC

] key when the zone appears on-screen

5) Press [

ENTER] key to save

To program a time period when the Chime Zones are activated, users:

1) Enter their [

ACCESS CODE]

2) Press the [9] key

3) Press the [2] key

4) Enter the time that keypads will start beeping when Chime Zones are

opened according to the 24-hour clock (i.e. 9PM is 21:00).

5) Enter the time that keypads will stop beeping when Chime Zones are

opened according to the 24-hour clock (i.e. 9PM is 21:00).

6) Press [

ENTER

] key to save

16.8 K

EYPAD

ETTINGS

The keypad’s settings can be modified to suit the user’s needs. Scrolling

Speed is how long the messages stay on the LCD screen before moving to

the next message. Backlight: is the illumination behind the keys and the

screen. Contrast: is how dark the characters appear on the LCD screen.

1) Enter the [

USER

ACCESS

CODE

]

2) Press [6]

3) Press [1]: Scrolling Speed from 0 to 10 (10 = slowest)

Press [2]: Backlight from 0 to 7 (7 = brightest)

Press [3]: Contrast from 0 to 4 (4 = most contrast)

4) Use the [

] and [ ] keys to increase or decrease the numbers

5) Press [

ENTER

]

6) Press [

CLEAR

] to exit or the [ ] key to move to the next setting

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 65 66

Kommentare zu diesen Handbüchern

Keine Kommentare

SEKURE DGP2-641 Installationshandbuch Seite 46

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme SEKURE DGP2-641